View source for Remote Power Cycling

<<[[Main_Page|<b>SBS Main</b>]]<<[[HOW_TOs#BigBite_Spectrometer_.28BB.29 | <b>HOW TOs (BigBite Spectrometer)</b>]]<br><br>

This page contains instructions for how to power cycle outlets in the remote-controlled power strips in Hall A. More info on crate resets, like power strip names and what is plugged into them, can be found [https://hallaweb.jlab.org/wiki/index.php/Crate_resets here].

==Power Cycling the Outlets Remotely==

* Go to the reboot switch with the device you wish to power cycle like [http://hareboot14.jlab.org hareboot14].
* Click on the tab at the top labeled `PDU'.
* Click on 'Outlet Action:Control' and a list of the slots and their names will appear.
* Next to `Control Action' select either `Turn On', `Turn Off', or `Reboot' based on your desired action. (Note: You may need to click the drop down menu that starts with 'Turn On' and use the arrow keys to select the other options as the menu sometimes doesn't appear.)
* Then click the checkbox next to the outlets you wish to apply this action to and press the `Next' button.
* You will be taken to a confirmation screen. Press `Apply' for the selected action to apply to the selected outlets.
* Make a HALOG entry noting what you did and why.

==List of Devices in hareboot14==
* the GRINCH camera is in '''switch 1''' labelled '''GRINCH Camera'''.
* The Upper HCal HV crate rpi20 power supply is in '''switch 2''' labelled '''HCal Upper HV Crate rpi20'''.
* The Lower HCal HV crate rpi21 power supply is in '''switch 4''' labelled '''HCal Lower HV Crate rpi21'''.
* The BB HV crate rpi17 power supply is in '''switch 6''' labelled '''BB HV rpi17'''.
* The BB HV crate rpi18 power supply is in '''switch 7''' labelled '''BB HV rpi18'''.
* The GRINCH LED pulser is in '''switch 8''' labelled '''GRINCH LED Pulser'''.

==http://129.57.188.119==
* The enpcamsonne PC is in '''switch 4''' labelled '''enpcamsonne'''.
* The HCal/BBCal threshold readback rpi is in '''switch 8''' labelled '''HCal/BB Threshold Readback rpi'''.